Home Page
Company Profile
Showroom
    Kemphos (Phosphating)
    Kemlyte (Passivation)
    Kemstrip (Paint Stripper)
    Kemklin (Derusting)
    Kemchrome (Chromatising)
    Kemphos (Chassis Cleaner)
    Kemlube (Acid Inhibitors)
    Kemclean (Degreaser)
    Kemchrome
    Kemclean
    Kemclean (Soak Cleaner)
    Kemlube
    Kemphos
    Kemlyte
    Kemstrip
 
KEMFIN CHEMICALS (P) LTD.
 
Kemclean-1550 (Floating Type Paint Booth Additive)
To inquire, Select Product/s & Click on

Product Code : 1550

[Select]
Product Specification

Kemclean-1550 (Floating Type Paint Booth Additive)
(
Floating Type Paint Booth Additive)

Product Description
The product is specially developed for the treatment of recirculating water in water backed paint spray booths and designed to be particularly suitable for use in large installations. Kemclean-1550 eliminates any over spray paint, rendering subsequent cleaning and maintenance much simpler. When mixed with a small quantity of mineral oils in pump spray booths, the cleaning of booth becomes much easier.

Product Specifications

a.

Colour

Off White Powder

b.

Chemical Composition

Blend of sodium salt of carbonate, bi-carbonate, Hydroxide, Polyphosphates, Aromatic Phenols as antisettling agents ionic emulsifiers

c.

Odour

Nil

d.

Foaming Tendency

Moderate

e.

Reliability

Good

f.

Handling

Avoid Skin Contact

g.

Solubility

Good

h.

pH

Alkaline Range

I.

Toxicity

Nil

j.

Flash Point

Nil

k.

Pollution Hazard

Moderate

Product Operating Data

Strength

5 kgs/1000 ltrs.

pH

9 – 11.0

Pointage

6 – 8 ml.

Product Operating Procedure
Mix 5 kgs. Kemclean-1550 powder in 1000 ltr. bath tank and churn it for 15-20 minutes to get Phomogenous solution and check its pH. In case of no-pump booth add 25 ltrs. of waste engine oil (mineral oil) in 1000 ltr. of bath solution until some free oil floats on the surface.

Product Application Equipments
Kemclean-1550 tank should be fabricated with 3 – 4 mm thick M. S. plates with continuous agitation arrangement.

Product Application Equipment

pH Value

  • Dip a strip of universal indicator paper in the solution and measure the pH value.

  • pH should not be less than 10.

Pointage
Pipette out 10 ml. smple. Add 2 to 5 drops of methyl orange indicator. Titrate with N/10 sulphuric acid to reach end point as red colour. Pointage should be maintained above 7 ml. For each point below 7 ml, add 725 gms of Kemclean-1550 per 1000 ltrs. solution to raise pointage by one unit.

Chemical Replenishment
Paint floats in form of light porous lumps on the top of the tank solution, which should be taken out on weekly basis to avoid pump clogging and when tank becomes quite dirty and contaminated with fine paint particles, the tank should be discarded.

Safety Measures
Kemclean-1550 contact with skin, eyes, and clothing's should be avoided and proper safety precautions should be taken by operators by using gloves, goggles and safety clothing. In case of accident, the affected portions should be continuously flushed with water,  and a physician should be immediately consulted.

General Information
Paint Maintenance becomes quite easy and hassle free. Use of this chemical reduces machine down time.

Other Products in 'Kemclean' category
Kemclean-K-11(Low Temperature Alkaline Degreasing
Kemclean-K-11(Low Temperature Alkaline Degreasing
Kemklin-106(Rust and Scale Remover)
Kemklin-106(Rust and Scale Remover)
Kemklin-109(Rust Remover)
Kemklin-109(Rust Remover)
KemClean 001 (D.G. Cleaner)
KemClean 001 (D.G. Cleaner)
Kemclean K-16 (Aluminium Degreaser Compound)
Kemclean K-16 (Aluminium Degreaser Compound)
KemLin-103 (Rust & Scale Remover)
KemLin-103 (Rust & Scale Remover)
 
View all products(10)
 
<< Back
 
 
 
 
Contact Details
KEMFIN CHEMICALS (P) LTD.
41 KM, Khandawali Road,Ballabgarh Haryana, India
Phone:91-129-2205556
Fax:91-129-2205256
Send Mail  
Contact Now
Key Personnel
Mr. Lokesh Bhalla (Director)
Mobile:+919811117680, +919999999190, +919810089212


Copyright © 2009 by KEMFIN CHEMICALS (P) LTD. All Rights Reserved.